Table of Contents
Advertisement
Getting Started
Using the Linear Time Counter
The linear time counter displays the tape run in hours, minutes, and
seconds helping you to keep track of how long you've been filming or time
you have left to film before running out of tape.
Turn the camcorder on to display the linear time counter. The linear time
counter keeps track from when you load a cassette into the camcorder
and clears to 0:00:00 when the cassette is ejected.
Using the Display Button
Pressing the DISPLAY button on the remote control allows you to switch
the displays in the viewfinder. When the camcorder is turned on, the linear
time counter appears.
Pressing the DISPLAY button once displays the linear time counter with
the memory feature.
Note: The linear time counter with the memory feature in the viewfinder can
also be displayed on the connected television.
Pressing the DISPLAY button a second time returns to the linear time
counter.
Using Memory
The linear time counter memory stops a rewinding tape at approximately
0:00:00M. This feature helps in locating a specific point in the tape to
which you wish to return. An example might be that you have recorded
26
Advertisement
Table of Contents
