DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Figure 6-60. Static Unicast MAC Forwarding Setup – Layer 2
The Action:<
> field can be toggled between Add/Modify and
Delete using the space bar. Enter the VLAN ID in the VID:[
]
field and the MAC address to be statically entered in the
forwarding table in the MAC Address:[
] field.
The Module:<
> field can be toggled between Base Unit (the 24
ports Fast Ethernet ports) and Slot-1 (the two optional Gigabit
ports). Enter the port number in the Port: [
] field.
Highlight APPLY and press enter to make the changes current.
Use Save Changes from the Main Menu to enter the changes into
NV-RAM.
IP Routing Forwarding
IP routing Switch Operation Mode
With the switch in Layer 3 Operation mode, entrees into the
switch's forwarding table can be made using both MAC addresses
and IP addresses. Static IP forwarding is accomplished by the
entry of a Static IP Route.
Static Address Resolution Protocol (ARP) entrees can also be made
from the Forwarding Menu.
MAC Address Forwarding
To enter a MAC address into the switch's forwarding table:
Highlight Forwarding from the Main Menu and press enter.
Configuring the Switch Using the Console Interface
197