Restoring The Control Program If An Error Occurs During Version Updating - Brother Z-8550A Service Manual

4-8-2. Restoring the control program if an error occurs during version updating

If the version updating did not complete normally, such as because of a power outage, the sewing machine will not operate
correctly.
If this happens, restore the control program by the following procedure.
1
Insert the CF card containing the control program data into the CF card slot.
2
Set the power switch (1) to ON.
3
Set the power switch (1) to OFF and remove the CF card.
The operation panel will switch off and the version updating will be
carried out.
When the power turns back on, the updating is complete.
Z-8550A, 8560A
4. USING CF CARDS
4453Q
0216B
0196B
30