Using The Electronic Image Stabilizer (Eis) - Hitachi DZ-MV350A Instruction Manual

USING THE ELECTRONIC IMAGE STABILIZER (EIS)

This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you use
zoom to record a magnified subject image, it will correct fuzziness in the recorded image.
1
Press the MENU button,
choose "EIS" on the
"Camera Functions
Setup" menu screen, and
then press the
button.
2
Choose the "On" or "Off", and then press the
button.
3
Press the MENU button to end the setting.
Came r a F u nc t i on s Se t u p
P r o g r am AE
Wh i t e Ba l .
E I S On
D i g . Zo om O f f
M IC . F i l t e r
ENTER RETURN RAM
Checking EIS On or Off
You can check EIS On or Off by the on-screen
information display.
EIS
After recording with EIS set to "Off", it is
recommended that you return the setting to "On"
and then turn the DVD video camera/recorder off,
unless you normally record with "Off" setting.
This function is effective only during movie
recording: It will not work during still recording.
:
Note
•
The EIS setting will be stored in memory even when the
DVD video camera/recorder is turned off.
•
Although you can switch EIS between on and off during
still recording, the setting will be effective only during
movie recording.
•
It is recommended that you specify "EIS Off" when using
the DVD video camera/recorder on a desk or tripod.
•
When "EIS On" is specified, there will be a slight
difference between the actual movement and the
movement on screen.
•
Gross camera shake may not be entirely corrected even
if "EIS On" is specified.
•
EIS may not operate correctly when the tele or wide-
conversion lens (generally available) is used.
0 : 0 0 : 0 0
REM 3 0 MIN
8 : 0 0 AM
FINE 9 / 3 0 / 2 0 0 3
83