Hitachi DZ-MV350A Instruction Manual page 82

:
Note
•
The white balance set using the "Set" option will be stored
in memory until it is reset.
•
Do not use a colored object when setting the white
balance: The appropriate tint cannot be set.
•
Do not block the infrared sensor with hand, etc.
•
If a generally available tele or wide-conversion lens is
used, the auto white balance may not operate depending
on the recording conditions. If this happens, set to the
mode to match the recording conditions, or manually set
the white balance.
•
Be sure to remove the lens cap before turning the DVD
video camera/recorder on: If the DVD video camera/
recorder is turned on with the lens capped, the white
balance will not work normally.
82
Infrared sensor block