Table of Contents
Advertisement
COPYING STILLS ON DVD-RAM DISC TO CARD (COPY)
1
Set the power switch to " " or " ".
2
Press the DISC NAVIGATION button.
3
Select the still to be copied.
4
Press the MENU button.
5
Choose "Copy" on the "Scene" menu screen,
and then press the
6
The "Copy to card" screen will appear: If you
are sure you want to copy the selected still,
press the
button.
If you want to change the still to be copied,
you can change it on this screen.
7
The screen for verifying copy will appear:
Choose "YES", and then press the
button.
Choose "NO" to cancel copy.
After Yes or No setting, the "Copy to card"
screen will be restored.
Repeat steps 6 and 7 to copy other stills to
card.
8
Press the
button to quit.
84
Note
• No movie can be copied.
• If you press the MENU button before pressing the
• See "Category" (p. 103) to check the stills recorded
• You can also select multiple scenes (p. 74).
• Even if all scenes, including movies, are selected to
button.
• Data on card cannot be copied to disc.
• The quality of still copied from disc to card will be the
• Stills recorded on a device other than this DVD video
:
button in step 6, the submenu screen will appear
(p. 79).
on DVD-RAM disc.
be copied, only stills will be copied.
same as when you recorded still on disc.
camera/recorder may not be copied normally.
Advertisement
Table of Contents
