Table of Contents
Advertisement
UPDATING CONTROL INFORMATION OF DVD-RAM/DVD-RW (VR-MODE)
DISC (UPDATE CONTROL INFO.)
Disc Navigation in this DVD video camera/recorder handles information on scenes, such as
thumbnail, skip, fade, in a particular manner. If you use another device to edit a disc recorded on this
DVD video camera/recorder, and then use the data again with Disc Navigation in this DVD video
camera/recorder, the Disc Navigation may not appear normally. If this happens, use the Update
Control Info function to update the data.
• When using the AC adapter/charger to power the DVD video camera/
Before You Begin
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the
/
/
/
choose "Update Control Info." on the "Disc"
menu screen, and then press the
The screen for verifying "Update Control
Info." will appear.
4
Choose "YES", and then
press the
button.
The message for
proceeding will appear,
and then the Disc Navigation menu screen
will be restored.
A black screen may appear while the message
for updating is displayed.
Choose "NO" to cancel updating.
100
recorder for updating control information, make sure that power is not
turned off during updating. If the DVD video camera/recorder is turned
off during updating and the updating is interrupted, the control
information will not be updated correctly.
Note
• It may take time to update the control information if
the disc has many recorded scenes.
• Even if control information is updated, some discs will
be unusable on Disc Navigation of this DVD video
/
buttons to
camera/recorder.
button.
U p d a t e C o n t r o l
I n f o.
U p d a t e C o n t r o l
I n f o ?
YES
NO
ENTER
:
Advertisement
Table of Contents
