Setting Up The Monitor; Installation - Philips 234E5 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents
3
AC/DC Adapter
Audio cable (optional)
Cable management
Warning
• Use only the AC/DC adapter supplied with
product by Philips.
ADPC1945(234E5QHSB/QHSW),
ADPC1965(234E5QHAB/QHAW/QDAB),
• For 234E5QSB product , refer to the elec-
tric voltage information on the rating label
before using the adapter.
ADPC1945 for 234E5QSB of version A
(S/N code change)
ADPC1236 for 234E5QSB of version B
(S/N code change)
234E5
VGA (optional)
DVI (optional)
4
Do not rip off panel film
Install base stand
1. Place the monitor face down on soft
and smooth surface taking care to avoid
scratching or damaging the screen.
2. Hold the base stand with both hands and
firmly insert the base stand into the base
column.
(1) Gently attach the base to the base
column until the latch locks the base.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the column tightly.
2
1