Get Started; Power Supply; Turn On - Philips AS360 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Power supply

Either AC power or batteries can be used as
power supply of this docking speaker.
Option 1: AC power
Caution
•
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the docking speaker.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adapter to the wall outlet.
Option 2: Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
1
Open the battery compartment.
2
Insert 4 AA batteries with correct polarity
(+/-) as indicated.
6 EN
3
Close the battery compartment.
Note
•
Batteries contain chemical substances, so they should
be disposed of properly.
•
Batteries are for backup purpose. You can not play a
docked device with the docking speaker in battery
mode.
•
When playing from a docked device, and the docking
speaker is installed with batteries, if unplug the adapter,
play will stop and the docking speaker will switch to
standby mode. Press
and switch to Audio in/Bluetooth/USB mode.

Turn on

Press POWER to turn on the docking speaker.
» The LED lights in green.
Switch to standby mode
Press POWER again to switch the docking
speaker to standby mode.
» The LED will turns off.
to restart the docking speaker,