Sagem MYC2-3 User Manual page 64

P - S
ROBLEM ITUATION
In WAP context:
SERVER NOT ANSWERING message
Logon to home page impossible
Operator name does not appear on
screen
How do I switch to silent mode?
How do I activate zoom?
How do I remove the envelop that
appears on the screen?
How do I lift the receiver that appears
on the screen?
How do I remove the written message
at the down of the home page (1 call)
How do I download ring tones?
How do I free up memory to download
my objects (sounds, images)
No text on the home page (network
name, menu)
64
Switch off and then switch phone back on.
In the WAP menu, Clear the cache.
Go into the Settings menu, select Networks, then [Select]. Wait until the
operator appears, select it and accept.
Hold key down unless ring tone sounds, when a short touch is enough.
Can be activated only in SMS and WAP screens; hold down key.
This envelop means that you have written or answer phone.
To remove it, all you need to do is enter the Messages menu to read your
messages. The envelop is then deleted.
In the case of a voice message, contact your answer phonebox and let it guide
you.
This receiver means that you have received answer phone in your message
box. To remove it, call your answer phone.
Press the key to return to the home page without messages.
Logon to one of the following site via your computer: www.planetsagem.com.
This site offers to send ring tones to your phone in the form of an SMS. You can
also logon to your operator's site. Once the SMS has been received, all you
have to do is save it: accept the option "Save messages", the tune will then be
added to your list. In addition, you can logon to some sites by phone.
Go into the Settings menu, select My objects then delete some objects (too
many).
Go to the Background/Wallpapers menus and select the option Activate in
Normal screen.
A
CTIONS
Troubleshooting