Selecting Silent Mode; Setting The Beeps; Deleting Dtmf Tones; Silent Mode - Sagem MY3088 User Manual

8.5 Selecting silent mode

If you want the ringing tone of your
Silent mode is
phone to be replaced by the vibrator
automatically
and the beeps to be suppressed
deactivated when
(except for the alarm tone), tick the
the hands free kit
box and validate by pressing OK. car is connected as
well as when the
This mode is indicated by the
phone is switched
symbol on the screen saver.
on/off.

8.6 Setting the beeps

Different controls are available:
You can select the
tones produced by
Setting the keypad tones
your keypad: Beep or
Select the tone required using
non active tones (in
the scrolling arrows and validate
this last case, when
(press ).
you press your
keyboard, it does not
Setting the network tone
make a noise).
If you want your phone to give a
warning beep when it locates a
network on which it can
communicate:
Tick the box and validate by
pressing OK.
MY_3078_3088_EN-08.p65 39
39
Setting the low battery tone
If you want your phone to give a warning
beep when your battery is low:
Tick the box and validate by pressing OK.

8.7 Deleting DTMF tones

(Depending on model)
You can delete the emission of DTMF tones
during a call. You can thus make a call, in a
comfortable and discreet way for you caller.
To be discreet, clear the selection from the
box. Validate by pressing OK.
8. Ringing tones and vibrator
04/10/2002, 14:09