Personalising The Ringing Tone; Selecting Silent Mode; Setting The Beeps; Deleting Dtmf Tones - Sagem MYH10 User Manual

Personalising the ringing tone

You have the option of creating a personalised call tune. A help menu, accessible by pressing the righthand key , will guide
you.
If you have saved melodies received by message (see Messages chapter), they will appear in that menu.
You can then modify the selected melody (if the copyright allows it), listen to it or select one of the following options:
- change its title
- send it by message to another person (if it is not Copyright protected)
- consult its memory capacity
- consult the available memory
- delete the selected melody
- delete all melodies.

Selecting silent mode

You can activate/deactivate the silent mode by holding down the ∗
This mode is indicated by the symbol

Setting the beeps

You can select the tones produced by your keypad: Beep, DTMF (musical keys) or non active tones (in this last case, when
you press your keyboard, it does not make a noise).
Different controls are available:
Setting the keypad tones
Select the tone required using the scrolling arrows and validate (press the righthand key ).
Setting the network tone
If you want your phone to give a warning beep when it locates a network on which it can communicate:
Tick the box and validate by pressing OK.
Setting the low battery tone
If you want your phone to give a warning beep when your battery is low:
Tick the box and validate by pressing OK.

Deleting DTMF tones

You can delete the emission of DTMF tones during a call. You can thus make a call, in a comfortable and discreet way for
you caller.
To be discreet, clear the selection from the box. Validate by pressing OK.
Ringing tones
on the screen.
key.
41