Display - Sagem MDP 1600 User Manual

Display

Option Actions/Descriptions
Phase Synchronizes the signal timing of the display with that of the
graphic card. If you experience an unstable or flickering
image, use the phase function to correct it.
Select the desired setting with the
Press the
Press the
Tracking Changes the display data frequency to match the frequency
of your computer graphic card. If you experience a vertical
flickering bar, use the tracking function to make an adjustment.
Select the desired setting with the
Press the
Press the
H.Position Adjusts the horizontal position.
Select the desired setting with the
Press the
Press the
V.Position Adjusts the vertical position.
Select the desired setting with the
Press the
Press the
button to decrease the value.
button to increase the value.
button to decrease the value.
button to increase the value.
button to move the image left.
button to move the image right.
button to move the image up.
button to move the image down.
/ buttons:
/ buttons:
/ buttons:
/ buttons:
English
EN-29