Remote Control Operation - Sagem MDP 1600 User Manual

Single panel 0.55” dlp projector
Table of Contents

Advertisement

Remote Control Operation

Point the remote control at the infrared remote sensor and press a button.
20
Distance: within about 3 meters from the front of the remote control.
Angle:
within about 20 degrees of the remote sensor in every direction.
The remote control may not operate when there is sunlight or other
strong light such as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is
visible.
Do not drop the remote control or jolt it.
Keep the remote control out of locations with excessively high
temperature or humidity.
Do not get water on the remote control or place wet objects on it.
Do not disassemble the remote control.
Under unusual circumstances the remote control may not operate well
due to the location being used or the surroundings. At such times,
change the direction of the remote control to the projector and retry the
operation.
3m
20
3m
20
20
English
EN-23

Advertisement

Table of Contents
loading

Table of Contents