Installation - Sagem FLP 3000-X User Manual

Lcd projector
Table of Contents

Advertisement

INSTALLATION

<NOTE!> Please read the important safety notice
(p1) carefully before installation.
Positioning
Please place the unit on a solid plat level surface.
Projection distance and image size
The distance from projector lens to the screen will
determine the size of the projected image. The
maximum image size is about 282 ~ 366 inches
diagonally at a distance of 15 meter.
Please refer to the table below for the image size
projected.
Projection Distance
(M)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
* "Wide" and "Tele" means the maximum and minimum
image size diagonally at the same distance by adjusting
lens to zoom.
Image Size (Diagonal)
Wide (inch)
Tele (inch)
24
18
48
37
72
56
97
74
121
93
146
112
170
131
195
150
219
169
244
187
268
206
293
225
317
244
341
263
366
282
Ventilation
* Please do not place any object near the ventilation
slots of the projector within 30cm distance.
* Please prevent any scraps or lint suck into ventilation
slots or use the projector in the dusty environment.
* Please do not operate the projector while the ambient
temperature or the humidity is too high.
* Please use the projector at plate level and use the
adjuster legs to adjust the height. Do not operate
the projector upside down or at an inclined level.
This may damage the projector.
Ceiling installation
* The projector can be installed on the ceiling for
education, conference and home entertainment
applications.
* The ceiling mount is an optional accessory.
Please contact qualified service personnel or agent
for further information or service.
4

Advertisement

Table of Contents
loading

Table of Contents