Country; Channel Search In Progress; Aerial Checking - Sagem ITD 66 User Manual

4. FIRST TIME INSTALLATION

4-4 COUNTRY

• Select the desired country with cursors
. This will also set the current time.

4-5 CHANNEL SEARCH IN PROGRESS

This menu will be shown as the Set Top Box is sear-
ching for TV and radio channels.
Please note that the search procedure may take a few
minutes.
You can cancel the search at any time by pressing
EXIT.
When the search procedure has ended, a message
will indicate how many TV and radio channels have
been found.
• Press to finish the first time installation and
to open the door of Digital TV.

4-6 AERIAL CHECKING

If the channel search has found no channel, this
screen is displayed to help you adjust the aerial.
Enter a channel number (refer to
http//www.dtg.org.uk/retailer/tx_details/_tx_index.htm.
For example, Oxford channel numbers are 29, 34, 48,
51, 52, 68. These numbers depend on broadcasters
and are subject to change.) and move the antenna
until the signal and quality bars are green.
When signal and quality are green, press
launch a new channel search.
and
AUTO TUNE
Searching... Searching...
CH 44
0%
ANTENNA POINTING
CHANNEL
SIGNAL STRENGTH
QUALITY
Adjust your antenna until to have
signal and quality bars in green
to
6
0007 0007 TV channels found TV channels found
0007 0007
RADIO channels found RADIO channels found
658 MHz 658 MHz 8 K 8 K
69
GOOD
MEDIUM
POOR
100%