Fault Functions - Hanna Instruments HI 92710 Instruction Manual

Data transmission from the instrument to the
PC is now much easier with new HI 92000
Windows
fered by Hanna Instruments.
HI 92000 allows you to use the powerful
means of the most spread sheet programs
(e.g.Excel
favorite spread sheet and open the file down-
loaded by HI 92000. It is then possible to
make any elaboration available with your soft-
ware (e.g. graphics, statistical analysis).
User friendly, HI 92000 offers a variety of fea-
tures and has an on line help to support you
throughout any situation.
To install HI 92000 you need a 3.5" drive and
a few minutes to follow the instructions con-
veniently printed on the disk label.
HI 92710, HI 92740, HI 92810 and HI 92840
are factory programmed to automatically di-
agnose a fault. This is displayed with error
codes on the LCD.
Error codes:
PEr 0, PEr 1, PEr 2 = Short circuit on the
system, the meter should be returned
for repair (see Warranty section).
PEr 3 = Printer mechanism fault - repair
needed (see Warranty section).
PEr 4 = Printer clutch jammed - reset the
printer (see page 31).
PEr 9 = Printer jammed - reset the printer
(see page 31).
®
Windows is registered Trademark of "Microsoft Co."
©
Excel Copyright of "Microsoft Co."
©
Lotus 1-2-3 Copyright of "Lotus Co."
®
compatible application software of-
©
, Lotus 1-2-3

FAULT FUNCTIONS

©
). Simply run your
28