Table of Contents
Related Manuals for Hanna Instruments HI 98701
Summary of Contents for Hanna Instruments HI 98701
- Page 1 Instruction Manual HI 98701 - HI 98801 HI 98704 - HI 98804 Portable Microprocessor Printing and Logging K - J - T Thermocouple Thermometers These Instruments are in Compliance with the CE h t t p : / / w w w . h a n n a i n s t . c o m...
-
Page 2: Table Of Contents
The GLP features provide a guarantee of data consistency. without the written consent of the copyright owner, Measurements can be performed with lab-grade precision in the field as Hanna Instruments Inc., 584 Park East Drive, Woonsocket, Rhode well as in the laboratory. Island, 02895 , USA. -
Page 3: Functional Description
9) !LOT INFO key (HI 98801 and HI 98804 only) to move down or view logging information (with ALT) ! key (HI 98701 and HI 98704 only) to move down 10) "CFM key, to move right or confirm values (with ALT) -
Page 4: Specifications
INITIAL PREPARATION INITIAL PREPARATION INITIAL PREPARATION INITIAL PREPARATION INITIAL PREPARATION SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Range -200.0 to 999.9 °C ; 1000 to 1370 °C Each meter is supplied complete with batteries. Remove the back -300.0 to 999.9 °F ; 1000 to 2500 °C cover, unwrap the batteries and install them while paying attention to -200.0 to 760.0 °C the polarity. -
Page 5: Setup Mode
PASSWORD PROTECTION SETUP MODE SETUP MODE SETUP MODE SETUP MODE SETUP MODE Setting of the GLP parameters (calibration alarm time-out, instrument ID code, time and date) can be password protected. If password is set Setup can be used to view data regarding instrument status (e.g. to a value different from 0000 (factory setting), the user will be asked battery charge) or GLP data (e.g. - Page 6 In HI 98801 and HI 98804 only. • If the lot doesn't contain data, the "no data" message will scroll In HI 98701 and HI 98704 only. The meter automatically checks for entered time/date accuracy as follows: across the LCD twice and the meter will return to setup mode.
- Page 7 the last printed sample number. It is then possible to select TO RESET PRINTING SAMPLE NUMBER another sample. (HI98701 and HI98704 only) • Press the ALT and FNC keys to return to setup mode. This feature resets the print on demand sample number to 001. Viewing logged data •...
-
Page 8: Taking Temperature Measurements
TEMPERATURE CALIBRATION PROCEDURES TEMPERATURE CALIBRATION PROCEDURES TAKING TEMPERATURE MEASUREMENTS TAKING TEMPERATURE MEASUREMENTS TAKING TEMPERATURE MEASUREMENTS TEMPERATURE CALIBRATION PROCEDURES TEMPERATURE CALIBRATION PROCEDURES TEMPERATURE CALIBRATION PROCEDURES TAKING TEMPERATURE MEASUREMENTS TAKING TEMPERATURE MEASUREMENTS ( ( ( ( ( for technical personnel only) for technical personnel only) for technical personnel only) for technical personnel only) for technical personnel only) -
Page 9: Hi98801 / Hi98804 Printing / Logging Functions
THERMOCOUPLE CALIBRATION HI 98801 - HI 98804 HI 98801 - HI 98804 HI 98801 - HI 98804 HI 98801 - HI 98804 HI 98801 - HI 98804 1. With a mV simulator, input 0.000 mV at channel 1 of the meter. PRINTING / LOGGING FUNCTIONS PRINTING / LOGGING FUNCTIONS PRINTING / LOGGING FUNCTIONS... - Page 10 logged reading will appear briefly on the LCD. To reactivate the the value will be stored in the lot 00 (log on demand data area). If LCD press ON/OFF. the print function is enabled, a printout is also produced providing the following information: TO STOP LOGGING a - Date...
-
Page 11: Hi98701 / Hi98704 Printing Functions
A last printout reporting the number of printed samples (e.g. S.00009) will be produced. Notes: • It is recommended to use the adapter during printing mode, HI 98701 - HI 98704 HI 98701 - HI 98704 HI 98701 - HI 98704 HI 98701 - HI 98704 HI 98701 - HI 98704 especially when many printouts are going to be taken. -
Page 12: Good Laboratory Practice (Glp)
® the ALT and LIGHT keys. If the LCD backlight feature is enabled, the by Hanna Instruments. LCD remains illuminated until the feature is disabled pressing the ALT HI92000 allows you to use the powerful capabilities of most spread and LIGHT keys. -
Page 13: Memory Organization
PRINTER MAINTENANCE PRINTER MAINTENANCE PRINTER MAINTENANCE PRINTER MAINTENANCE PRINTER MAINTENANCE MEMORY ORGANIZATION MEMORY ORGANIZATION MEMORY ORGANIZATION MEMORY ORGANIZATION MEMORY ORGANIZATION HI HI HI HI HI 98801 98801 98801 98801 98801 - - - - - HI HI HI HI HI 98804 98804 98804 98804 only... -
Page 14: Battery Replacement
K-TYPE THERMOCOUPLE PROBES K-TYPE THERMOCOUPLE PROBES K-TYPE THERMOCOUPLE PROBES K-TYPE THERMOCOUPLE PROBES K-TYPE THERMOCOUPLE PROBES BATTERY REPLACEMENT BATTERY REPLACEMENT BATTERY REPLACEMENT BATTERY REPLACEMENT BATTERY REPLACEMENT WITH DETACHABLE HANDLE & MINI-CONNECTOR When the batteries are inserted and no power adapter is connected, the meter can recognize different batteries charge levels. - Page 15 HI 766PE1 General use probe, max 900°C/1650°F HI 766B1 90° surface probe, max 450°C/840°F 155mm 6.1" 30mm 0.12" 1.2" 300mm 11.8" HI 766B2 Surface probe, max 900°C/1650°F HI 766PE2 General use probe, max 900°C/1650°F 200mm 0.3" 7.8" 130mm 0.20" 5.1" HI 766B3 Small surface probe with insulated shaft, max 200°C/390°F HI 766HD Rugged thermocouple probe handle with 1m (3.3' ) cable fitted with a mini-connector...
-
Page 16: Accessories
If the repair is not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be returned to Hanna Instruments, first HI 766F1 Flexible probe without handle, max 480°C/900°F obtain a Returned Goods Authorization number from the Customer Service department and then send it with shipping costs prepaid. - Page 17 HANNA LITERATURE HANNA LITERATURE HANNA LITERATURE HANNA LITERATURE HANNA LITERATURE LAB RECORDING WATER ANALYSIS HANDBOOK WATER TREATMENT GENERAL CATALOG These and many others catalogs, handbooks and leaflets are available from Hanna. To receive your free copy, contact your dealer or the nearest Hanna Customer Service Center.