Advertisement
LBH-780 SERIES
LBH-780 SERIES
At the very least, a good buttonholing machine should
finish seams of consistent quality and be widely
adaptable to many different kinds of materials and seam
specifications. The LBH-780 series buttonholing machines
respond to these needs and help reduce operator fatigue,
thereby finishing high-quality buttonholes with a higher
degree of efficiency.
The buttonholing position can be easily adjusted. This further
enhances ease of operation.
A newly introduced mechanism in the needle thread trimmer
prevents interference with the positioning of buttonholes. The shape
of the face plate is designed to provide sufficient clearance around
the needle entry position. As a result, ease of operation is further
improved.
The work clamp can be lifted as high as 12mm. The machine is
capable of sewing heavy-weight materials such as bulky knits.
The maximum lift of the work clamp is 12mm, enabling the machine
to make high-quality buttonholes in heavy-weight materials.
Work clamp can be easily lifted. This helps to substantially reduce
operator fatigue. The pressure required to depress the start pedal
and lifter pedal has been reduced. This helps to dramatically reduce
operator fatigue.
The knife mechanism and stop-motion mechanism produce less noise
when they actuate, thus contributing to a more comfortable working
environment. Thanks to the simple design of the stop-motion
mechanism and unique knife mechanism, the machine operates with
low noise. The machine starts, decelerates and stops smoothly.
LBH-780NV
LBH-780NV
(for double-stitching with gimp)
LBH-780NB
LBH-780NB
(for double-stitching with gimp and gimp cutter)
The machine neatly tucks in tetron gimps with consistency.
Thanks to the improved locus of the gimp guide, the machine is
flexibly adaptable to changes in the types of gimps to be used, easily
switching operation to accommodate one to three pieces of tetron
thread, or one sewing thread and one span thread. In addition, the
gimp guide is designed so that it shifts vertically. This means that
the relation between the needle and the gimp guide is uniform even
if the material thickness varies, thus allowing the machine to tuck in
gimps with consistency.
A machine is designed for sewing soft-to-the-touch circular bartacks.
It has been developed to sew circular bartacks on ladies' wear, a
process that requires a very delicate finish.
The machine ensures stable stitching performance on multi-layered
portion of the material. The improved work clamp and its
fulcrumsecurely hold multi-layered portions of a heavy-weight
material, thereby preventing sewing troubles such as uneven material
feed, slip-off of gimp and needle breakage. This allows the machine to
perform buttonholing with consistency.
The gimp cutter dramatically promotes lobor-saving. (NB type)
The length of remaining gimp after its trimming is only about 2mm.
This eliminates the thread cropping procedure in the after-process,
thereby increasing productivity. The distance between the gimp-
cutting scissors and the needle scarcely changes when sewing multi-
layered portions of the material, thus ensuring consistent gimp-
cutting at any occasion.
A new LBH series model has been designed for a round-type
of bartacking for ladies' wear with a soft, femine touch. With
this new model, finished products provide a soft feeling.
This needle entry point can visually
checked. This permits easy
positioning of buttonholes.
Square-type bartacking
12mm
The lift of the work clamp is as
high as 12mm.
LBH-783NB
LBH-782NB
Round-type bartacking
Advertisement
