Removal Of The Lens Unit And Zoom Focus Motor - Mitsubishi Electric LC62 CHASSIS XL6500LU Service Manual

3. Removal of the lens unit and
zoom focus motor
1. Remove the six screws (a) as shown in Fig. 3-3.
2. Pull the top and left side of the front case unit (as
shown by the arrow (A)) as shown in Fig. 3-3.
3. Raise the left side of the front case unit (as shown by
the arrow (B)) as shown in Fig. 3-3.
4. Pull the left side of the front case unit to front for re-
moval (as shown by the arrow (c)) as shown in Fig.
3-3.
5. Remove the three screws (b) as shown in Fig. 3-3.
6. Slide the top cover unit to the front (as shown by ar-
row (D)) as shown in Fig. 3-3.
7. Remove the top cover unit to upward (as shown by
the arrow (E)) as shown Fig. 3-3.
8. Disconnect the connector (MA) as shown in Fig. 3-3.
9. Loosen the four screws (c) as shown in Fig. 3-3.
10. Remove the lens unit as shown Fig. 3-3.
11. Remove the two screws (d) as shown in Fig. 3-3.
12. Remove the zoom focus motor as shown in Fig. 3-3.
Top cover unit
E
bx3
Lens unit
cx4
Zoom focus motor
dx2
ax6
- 19 -
D
MA
A B
C
Front case unit
Fig. 3-3