Mitsubishi Electric LC62 CHASSIS XL6500LU Service Manual page 13

(3) Warning dialog window
1. The warning dialog window displays the error location.
2. "ERROR TIME (SET TIME)" displays the time when the
warning history data were saved (,or the SET TIME in the
service menu). "ERROR TIME" and "SET TIME" shown in
the main dialog window are useful to know when the error
occurred.
3. Pressing the Detail button activates Notepad and opens
the file containing the information about the set and the
warning data. To prevent writing over this file, be sure
to select "Save As" from "File" of the menu in Notepad to
save the file. The name of the file being displayed should
be "DataTemp.txt."
4. Pressing the [Warning Clear] button displays the confirma-
tion message window, which asks you whether you will
clear the warning history data. Press the [OK] button to
clear the warning history data or the [Cancel] button to
cancel clearing them.
5. Pressing the [Back] button displays the main dialog win-
dow again and carries out communication with the projec-
tor again to get information from it.
Indicates which data of the
Warning Status 1, 2, or 3 are
displayed.
All the error items are
displayed in red and their
check boxes are checked.
Displays the SET TIME
when the warning history
data were saved.
Creates a Clears all the
detailed report. warning history data.
Warning dialog window
- 4 -
(4) Switching the COM port
1. Select the serial port to which the cable is being connect-
ed. When the selected serial port isn't available or doesn't
exist, an error message window is displayed.
2. Press the [OK] button to switch the COM port. When the
serial port is switched correctly, communication with the
projector is carried out again to get information from it.
COM port switching dialog window
Goes back to the
main dialog window.
The information to
be displayed var-
ies depending on
the model.