Speaker Settings - Oppo BDP-93AU User Manual

Table of Contents

Advertisement

S E T U P
M E N U
O P T I O N S

Speaker Settings

For each speaker in the home theater system, you can set its size, distance and trim level. To configure
a speaker, use the LEFT/RIGHT ARROW buttons to move the cursor to highlight the speaker and press
the ENTER button. The Speaker Settings menu on the right side of the screen will be activated. In the
Speaker Settings menu, use the UP/DOWN ARROW buttons to select a parameter, and then press the
ENTER button to change it. To exit the Speaker Settings menu and return to the Speaker Configuration
illustration, press the LEFT ARROW button or select the "Exit" option. You can also move on to
configure the next speaker by selecting the "Next Speaker" option.
The following speaker parameters can be configured:
1. Size: The speaker size parameter sets bass filtering control for the speakers. The options are:
Large – Bass frequencies are passed to the speakers. The bass frequency is set in the
"Crossover Frequency" option of the "Audio Processing" section of the Setup menu (see page
70 for details).
Small – Bass frequencies are not passed to the speakers to reduce possible distortion. If the
subwoofer is available, bass frequencies are redirected to the subwoofer.
On (for subwoofer only) – Specify that a subwoofer is available.
Off – Speaker for the corresponding position does not exist. Audio for the missing speaker is
redirected to other speakers or discarded if redirection is not possible.
NOTE
The "Size" for front, surround and surround back speakers are configured as pairs. Changes
to the size of one speaker will automatically change the other speaker of the pair.
2. Distance: The speaker distance parameters set delay control for the corresponding audio channel.
The delay is to compensate for the audio propagation time difference caused by the placement of
speakers.
Speaker distance compensation is not required if the A/V receiver has the capability to adjust
channel delay and compensate for speaker distance differences. However, if your receiver does
Speaker Configuration
Test Tone
Test Tone : Off
Configure the front left speaker
Front Left Speaker
Size:
Distance:
Trim:
Next Speaker
Exit
Down Mix Mode: 7.1Ch
68
Large
12ft
0.0dB
Exit

Advertisement

Table of Contents
loading

Table of Contents