Usb Configuration; Automated Installation Routine Wizard - LG 55WV70MS Owner's Manual

Automated Installation Routine Wizard (Cont.)

USB Configuration

This section describes how to configure a TV for FTG Mode via CPU operation using an FTG
Configuration (.tlx) file loaded on a USB memory device.
Note: Refer to the Free-To-Guest (FTG) File Manager User Guide and/or "Creating an FTG
Configuration File using the FTG File Manager" on pages 40 to 41 for information on creating an
FTG Configuration (.tlx) file.
Note: This procedure assumes that the FTG Configuration file contains an FTG Channel Map. If
not, any Installer Menu and/or TV setup menu settings contained in the file will be transferred to
the TV (as with typical cloning); however, the TV will remain in Pass-through Mode and will not
be configured for FTG Mode via CPU.
1. Plug the USB memory device that contains the FTG
Configuration (.tlx) file into the Target LT770H TV USB IN port.
2. Use the Up/Down arrow keys on the Installer Remote to
select/highlight USB Configuration from the Automated
Installation Routine Wizard Welcome screen. Then, press OK.
3. In the Accessing USB Storage Device window, use the Up/
Down arrow keys to select the FTG Configuration file you
wish to use to configure this TV, and then press OK.
The TV will show configuration progress in a new window.
Do NOT remove the USB device until configuration is
complete. When the configuration is complete, the TV will
briefly display a "Complete" window and then exit the

Automated Installation Routine Wizard.

4. Remove the USB memory device, and verify that the FTG
Configuration is resident on the Target TV.
The Target TV CPU is now in FTG Mode.
Note: After the configuration process is complete, the TV tunes
according to the Start Channel setting in the Installer Menu. If
a Start Channel is specified, the TV will tune to that channel;
otherwise, the TV will tune to the lowest logical channel in the
FTG Channel Map.
14
Accessing USB Storage Device
Please select configuration file (*.tlx)
xxLT770H-UA00001.TLX
USB Configuration
Configuring TV
Please wait...
Warning - Do not remove the USB device during this process
Move
OK Prev.
95%
206-4214