Detaching The Front Panel; Operating With The Top Menu Screen - Kenwood DNX9210BT Instruction Manual

Return to the Top page
Basic Operations
D
etaching The Front
Panel
You can detach the front panel to prevent
theft.
1
Press the <0> button for
1 second to open the front panel.
0
NOTE
• You can set the front panel to open automatically
when the ignition is turned off. See Monitor
angle control (P.74).
2
Detach the panel as the diagrams
below.
3
2
1
4
NOTE
• The attaching plate closes automatically in about
10 seconds after the front panel is released.
Remove the panel before this happens.
12 12
● After detaching:
●
Put the panel in the protective bag
supplied with the unit.
NOTE
• To prevent deterioration, do not touch the
terminals of the unit and faceplate with your
fingers.
• If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
Attaching the front panel
1
Hold the panel securely so as not
to drop it accidentally, and fit it
onto the attaching plate until it is
firmly locked.
1
1
2
O
perating With The Top Menu Screen
Most functions can be performed from the Top Menu screen.
1
Touch [Menu] on any screen.
Top Menu screen appears.
From this screen, you can perform the following functions.
Function
Switch the audio source
Enter setup mode
etc.
Display navigation
screen
or
Turn off all audio
function
Return to the Top page
Basic Operations
NOTE
• If [Menu] is not
displayed during
video/picture
playback, press the
<MENU> button.
(P.6)
NOTE
• You can select the
hiding icon by
scrolling the screen
left or right.
Icon Operation
Touch the icon of the
desired source.
etc.
Touch the icon of the
desired setup function.
Touch [NAV] or
navigation information.
Touch [STANDBY].
Continued
13