BBQ 146.23676310 Owner's Manual page 25

Grease Cup Clip, Grease Cup and LP tank
13
□ Hang grease cup clip from bottom of grease tray. Slide grease tray into bottom of firebox from back.
Make sure the grease drainage hole is on the right side, as seen from the back of the grill. Place
grease cup into grease cup clip.
□ Align back rail holes with holes on back legs and firebox. Attach back rail with (4) M4x10 screws.
□ Feed the regulator hose through the hose bracket on Right Front Leg and fix with cotter pin.
□ LP tank is sold separately. Use only with an OPD (Overfill Protection Device) equipped LP tank. Fill
and leak check before attaching to grill and regulator.
□ Place LP tank into hole in bottom shelf with tank collar opening facing to side as shown. Raise tank
holder to hold LP tank securely in place.
CAUTION
Failure to install grease cup clip and cup will
cause hot grease to drip from bottom of grill with
risk of fire or property damage.
CAUTION
Failure to install tank correctly may allow gas
hose to be damaged in operation.
The screws used in this step:
4pcs of M4x10 screws
146.23676310 • 25