Table of Contents
Advertisement
The unique CleanSmart
12
The CleanSmart™ washer has two modes of washing, HE 'On' (High Efficiency) and
HE 'Off' (Conventional). Both modes start the same way, with a Detergent Activating wash.
Detergent Activating wash
CleanSmart™ fills the bowl at the selected water temperature,
with just enough water so the clothes are saturated. This small
amount of sudsy water flows through the clothes, up a specially
designed portal and back onto the clothes in a waterfall effect.
This thoroughly dissolves and activates the detergent.
High Efficiency On (High Efficiency mode)
In the High Efficiency mode the CleanSmart™ then fills with just
enough cool water to lift the clothes off the low-profile agitator so
that when it rotates, the clothes gently roll over each other. This
wash gives you the benefit of water savings, using similar quantities
of water to most front loaders.
High Efficiency Off (Conventional mode)
The Conventional mode is the immersion wash all top-load washer
users are familiar with. However, this mode still uses less water than
that of other top loaders which utilise the immersion wash. After the
Detergent Activating wash the CleanSmart™ fills with cold water until
the clothes are submerged, and gently turns the clothes over. We
recommend this mode when the dilution effect of water can solve or
prevent common wash problems. For example, when dye or colour run
can be a problem (ie new, dark-coloured garments), or when washing
sandy towels.
Some cycles can be used in both modes, whilst others are available in only one.
Regular
Heavy
Handwash
Sheets
Easy Iron
Bulky
Allergy
Quick
Towels
These two wash modes mean that your CleanSmart™ washer gives you the best of both worlds,
accommodating any laundry situation.
wash
™
HE On
–
–
–
Fig.11 Detergent Activating wash
Fig.12 High Efficiency wash
Fig.13 Conventional wash
HE Off
–
Hide quick links:
Advertisement
Table of Contents
