Parts And Controls; Initial Mower Setup; Adjust The Handlebar - Honda HRX217VKA Owner's Manual

PARTS AND CONTROLS

RECOIL
STARTER
(P. 9)
GRIP
HANDLEBAR
ADJUST KNOB (2)
(P. 3)
OIL FILLER CAP
(P. 4)
SMART DRIVE
CONTROL
HANDLEBAR
CUTTING HEIGHT
ADJUSTMENT
(P. 6)
LEVER (4)
SPARK PLUG
(P. 13)
CAP
AIR FILTER
(P. 12)
CARBURETOR
FUEL VALVE ON
BLADE CONTROL
(P. 8)
LEVER
REAR
DISCHARGE
(P. 5)
GUARD
FUEL TANK CAP
MUFFLER
(P. 13)
(P. 8)
GRASS BAG
(P. 4)
CLIP DIRECTOR®
(P. 5)
KNOB
FUEL VALVE OFF

INITIAL MOWER SETUP

List of Parts
With help of an assistant, carefully remove the mower and loose parts
from the carton and compare the loose parts against the following list.
Contact the authorized Honda dealer from whom you purchased the
mower if any of the loose parts shown are not included with the
mower.
(P. 7)
Ref. No.

Grass bag frame

Grass bag

Engine oil and owner's manual


Adjust the Handlebar

1. With the handlebar adjust knobs in the unlocked position, pull the
blade control lever against the handlebar, and then raise the
handlebar into the mowing position .
BLADE CONTROL
LEVER
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs to the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height.
4. Remove all the cardboard from around the handlebar.
Description

HANDLEBAR ADJUST
KNOBS
UNLOCKED
Qty.
1
1
1

LOCKED
3