Table of Contents
Advertisement
CD RIPPING Function
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
Switch the system
Connect the
1
2
on by pressing
USB.
POWER.
To stop ripping, press
Press CD
STOP( )button.and
4
RIPPING button
5
on remote control
then automatically
to starting ripping.
create and save as
the MP3 file.
If the system is playing state, p ress this button,
"TRACK RIPPING" is displayed and CD
After CD-Ripping,a directory named
RIPPING starts.
"RIPPING FOLDER" will be created in your
If the system is playing state, p ress and hold this
device.The file name is same with the disc.
button, "FULL CD RIPPING" is displayed and CD
RIPPING starts.
During CD ripping, do not disconnect USB
device.
Note
Don't disconnected USB and AC Cord during CD-Ripping. This may cause
◆
the file damage. If you want to stop CD-Ripping during CD-Ripping, you must
press stop Key first and after the CD Stopped, then you can remove the USB
device.
◆
If you disconnected USB device when CD Ripping, the main unit will be
power off and you may not delete the ripped file, In this case, please connect
the USB on the PC and backup the USB data on the PC first and then
formate the USB device .
◆
When the USB memory is not enough, it will be displayed "RIPPING
ERROR".
DTS-CD can't for CD Ripping.
◆
With external HDD, FAT format the USB can be CD Ripping, but not NTFS.
◆
The CD Ripping function of this product does not support all USB devices.
When you use CD high speed search function or in the Pause or Stop mode,
◆
the CD Ripping can't work.
During CD Ripping, do not deal impact. If is shocked while CD Ripping, CD
◆
Ripping maybe disengage.
◆
Sometimes, some of USB devices, CD Ripping time is long.
In program mode, you can't use CD RIPPING function.
◆
When CD Ripping completes or Stops, the CD will reload.
◆
47
Load a compact
3
disc(Digital
Audio).
Press the OPEN/CLOSE button to open
the CD door.
Insert a CD and press the OPEN/CLOSE
button to close the CD door.
Use the CD selection (
) buttons
to select the desired song.
Timer Function
•
The timer enables you to switch the system on or off at specific times.
•
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
•
Before setting the timer, check that the current time is correct.
•
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
Press TIMER/
Switch the system
CLOCK until
1
2
on by pressing
TIMER is
POWER.
displayed.
4
5
Set the timer
Set the timer
switch-off time.
switch-on time.
a. Set the hour by pressing
or
a. Set the hour by pressing
button.
button.
b. Press ENTER .
b. Press ENTER.
•
•
The minutes flash.
The minutes flash.
c. Set the minutes by pressing
or
c. Set the minutes by pressing
button.
button.
d. Press ENTER.
d. Press ENTER.
•
•
OFF TIME is displayed (instead
VOL 10 is displayed, where 10
of the equalizer symbols) for a few
corresponds to the volume
seconds, followed by any switch-
already set.
off time already set; you can now
set the timer switch-off time.
Press or button
Press ENTER to
to select the source to
7
8
confirm the timer.
be played when the
system switches on.
•
TUNER (radio) :
a Press ENTER.
b Select a preset station by pressing
or
.
•
DVD/CD (compact disc) :
Load on or more compact disc.
•
TAPE(cassette): Insert a cassette tape.
•
USB :Insert a USB.
•
If the timer switch on and off times are identical, the word ERROR is displayed.
Note
•
If there is no tape, disc or usb, when you select the "DVD/CD, USB, it will automatically change
to "TUNER".
ENG
Press the ENTER
3
button.
•
ON TIME is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
Press
or
button
6
to adjust the volume
level and press
ENTER.
•
or
The source to be selected is
displayed.
or
Press POWER to
set the system to
9
standby mode.
•
is displayed to the top right of
the time, indicating that the timer
has been set.
•
The system will switch on and off
automatically at the required
times.
48
Advertisement
Table of Contents
