Foxconn P4M800P7MB Manual page 53

v Primary INTR
Selecting "ON" will cause the system to wake up from power saving modes
if activity is detected from any enabled IRQ channels. The setting values
are: ON and OFF.
vIRQ3 (COM2)
This option is used to enable or disable IRQ3 (COM2) activity monitoring. The
setting value are: Disabled and Enabled.
vIRQ4 (COM1)
This option is used to enable or disable IRQ4 (COM1) activity monitoring. The
setting value are: Disabled and Enabled.
vIRQ5 (LPT2)
This option is used to enable or disable IRQ5 (LPT2) activity monitoring. The
setting value are: Disabled and Enabled.
vIRQ6 (Floppy Disk)
This option is used to enable or disable IRQ6 (Floppy Disk) activity monitoring.
The setting values are: Disabled and Enabled.
vIRQ7 (LPT1)
This option is used to enable or disable IRQ7 (LPT1) activity monitoring. The
setting value are: Disabled and Enabled.
vIRQ8 (RTC Alarm)
This option is used to enable or disable IRQ8 (RTC Alarm) activity monitoring.
The setting values are: Disabled and Enabled.
vIRQ9 (IRQ2 Redir)
This option is used to enable or disable IRQ9 (IRQ2 Redir) activity monitoring.
The setting values are: Disabled and Enabled.
46
Chapter 3
IRQs Activity Monitoring Menu
BIOS Description