Power Supply - Foxconn P4M800P7MB Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting the
power supply.
24-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector.
Make sure that the power supply cable
and pins are properly aligned with the
connector on the motherboard. Firmly
plug the power supply cable into the con-
nector and make sure it is secure.
4-pin ATX_12V Power Connector: PWR2
The ATX power supply connects to PWR2
and provides power to the CPU.
Note:
W e strongly recommend that you use 300 W
power supply or above. If you want to use 20-
pin power supply, you need to align the ATX
power connector according to the right picture.
Chapter 2 Installation Instructions
24-pin ATX power connector
RSVD
+ 5 V
GND
+5V
+5V
GND GND
24
12
GND
+3.3V
+12V
+12V
PWROK
+5 V
+
5V_AUX
4-pin ATX_12V power connector
1
GND
1 2V
3
Align the connector
PS-ON
GND +3. 3V
GND -12V
13
1
+3.3V
GND
+3.3V
GND
+5 V
2
GND
1 2 V
4
11