Selecting The Cassette Playback Mode; Tape Counter - Samsung MM-T5 Instruction Manual

Selecting the Cassette
Playback Mode
Your micro component system has three cassette playback
modes which enable you to listen to both sides of a cassette
automatically.
Press REV.Mode until the appropriate symbol is displayed.
When the display indicates... The micro component system plays
back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
SLEEP EQ/S.BASS
SHUFFLE
REV.MODE
CD/MP3-CD
VOLUME
REPEAT
MO/ST
TAPE SPEED
COUNTER RESET
TUNING /
ALBUM
/
TUNING
MODE
+10

Tape Counter

When playing a cassette, a counter is displayed to enable you to
take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to
listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note
of the counter values at the beginning of each track, reset the
counter by pressing COUNTER RESET.
AUX
PROGRAM/SET
SLEEP EQ/S.BASS
SHUFFLE
REV.MODE
CD/MP3-CD
VOLUME
REPEAT
TA P E
REP. A B
MO/ST
TAPE SPEED
COUNTER RESET
TUNING /
ALBUM
/
TUNING
MODE
+10
17
GB