Dispenser(Option); Replacing The Lamp - Samsung RT38D Owner's Instructions Manual

Dispenser
(option)
How to use the water dispenser
Push the lever with glass to
dispenser water.
When tank cleaning is needed, lift
tank and then tilt outwards(after
removing the connecting hose).

REPLACING THE LAMP

Turn the existing lamp bulb and replace it with a new one.
Replace the lamp cover by aligning the cover at the top and carefully
pressing it into place.
Fasten
When refilling is needed, slide
cover to the left and pour
in water(only drinking water
should be used).
Before using the water dispenser
1. Clean the water before use, to remove dust and oder.
2. Fill water tank with drinking water.
3. Push dispenser lever with glass to discasrd 3-4 glasses
of water, thereby cleaning the water hose before use.
4. Dispensing water for the first time might take 1-5
seconds due to air within the hose.
Press upper tab of the lamp cover with some tool
such as screwdriver and pull it out.
Loosen
16
Remove the connecting-hose
when cleaning needed.