Disassemble The Flex Door; Reattaching Refrigerator Doors - Samsung Refrigerator User Manual

3. Remove the 3 hex head bolts ( 7 ) attached to
the upper left and right door hinges with a socket
wrench (10mm).
Remove the ground screw ( 8 ) attached to the
upper left and right door hinges with a philips
screwdriver (+). Remove the upper left and right
door hinges ( 9 ).
Socket wrench
7
9
4. Lift the door straight up to remove.
5. Remove the screw ( 10 ) attached to the lower left
and right door hinges with a philips screwdriver (+).
Remove the 2 hex head bolts ( 11 ) attached to
the lower left and right door hinges with an allen
wrench (3/16"). Remove the lower left and right
door hinges ( 12 ).
12
10
11
Allen wrench
REATTAcHING THE REFRIGERATOR
DOORS
To reattach the fridge doors after you have moved the
fridge to its final location, assemble parts in reverse
order.
08_ setting up
DA68-02520A(0.4).indb 8
8

DISASSEMBLE THE FLEx DOOR

1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) w/harness with a flat-blade
screwdriver (-).
2
3. Press the locking tab and separate the Wire
Connector.
When reassembling it, be sure to connect the
wire harness.
cAuTION
If it is not connected, the Flex Room does not
work.
4. Remove 2 hex head bolts from the sides with a
socket wrench (10mm).
5. Lift up the Flex door from the rails.
1
2011.6.8 8:40:1 AM