Getting Ready To Install The Refrigerator; Using The Ice Maker - Samsung Refrigerator User Manual

setting up your side-by-side
refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy
the many state-of-the-art features and effi ciencies
that this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level) fl ooring.
• Select a location with enough space for the
refrigerator doors to open easily.
• Allow suffi cient space to the right, left, back and
top for air circulation.
- If your refrigerator is not level, the internal cooling
system may not work correctly.
- Refer to drawing and dimensions below for overall
space required for use.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
at least 6mm at least 6mm
When moving your refrigerator
To prevent fl oor damage be sure the front levelling
06_ setting up 06_ setting up
legs are in the up position (above the fl oor). Refer to
'Levelling the refrigerator' in the manual(at page 10).
To protect the fi nish of the fl ooring, place the
protection sheet such as packing carton under the
refrigerator.
When installing, servicing or cleaning behind
the refrigerator, be sure to pull the unit straight
CAUTION
out and push back in straight after fi nishing.

USING THE ICE MAKER

(OPTIONAL)
To Remove the Ice Bucket
- Hold the handle as shown in
fi gure1.
- Slightly pull up the bottom
at least 6mm at least 6mm
part.
- Take out the ice bucket
slowly.
Leg Leg
Screw Driver Screw Driver
Figure1 Figure1