Changing The Interior Lights; Using Your Refrigerator - Kenmore BOTTOM FREEZER REFRIGERATOR Use & Care Manual

CHANGING THE INTERIOR LIGHTS

WARNING
Electric Shock Hazard
Before changing any of the interior lights, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box. Failure to do so could cause electric shock
resulting in death, personal injury, or damage to the
appliance.
Refrigerator Light Replacement
(40W standard appliance bulb)
1. Unplug the power cord from the outlet.
2. Open the refrigerator door.
3. Pull the light cover down while pushing it backwards
to remove it.
4. Remove the bulb by turning it counterclockwise.
5. Replace with new bulb by turning it clockwise.
6. Install the light cover, close the door, and plug in
the power cord.

USING YOUR REFRIGERATOR

Light Cover
23
Freezer Light Replacment
(40W standard appliance bulb)
1. Unplug the power cord from the outlet.
2. Open the freezer door.
3. Pull the shield down while pushing it backwards
to remove it.
4. Remove the bulb by turning it counterclockwise.
5. Replace with new bulb by turning it clockwise.
6. Install the light cover, close the door, and plug in
the power cord.
Light Cover
CAUTION
Do not place your fingers inside the cover. The light
bulb may be hot.