Picture Options - Samsung Plasma TV User Manual

Picture Options

❑
You can customize the additional picture settings to suit your preference.
In PC mode, you can only make changes to the Colour Tone, Size, and Screen
N
Burn Protection from among the items in Picture Options.
Colour Tone → → Cool / Normal / Warm1 / Warm

You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected Picture mode.
N
Warm1 or Warm is only activated when the picture mode is Movie.
N
Size

You can select the picture size which best corresponds to your viewing requirements.
• 1:: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
• Wide Zoom: Magnify the size of the picture more than 4:3.
• Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
• 4:: This is the default setting for a video movie or normal broadcasting.
• Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p)
or Component (1080i / 1080p) signals are input.
The picture size options may vary depending on the input source.
N
The items available may differ depending on the selected mode.
N
In PC Mode, only 1: and 4: mode can be adjusted.
N
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
Wide Zoom: Press the ► button to select
N
Press the ▲ or ▼ button to move the screen up / down. Then press the ENTER E button.
Zoom: Press the ► button to select
N
and down. Then press the ENTER E button. Press the ► button to select
Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER E button.
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing
N
the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER E button. You can initialize the setting.
N
You can select these options simply by pressing the P.SIZE button on the remote
O
control.
Digital NR → → Off / Low / Medium / High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
when the signal is weak, select one of the other options until the best picture is displayed.
N
This function is not available in PC mode.
N
HDMI Black Level → → Normal / Low

You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
N
Film Mode

You can optimize the picture mode for watching movies.
• Off : Turn the Film Mode function off.
• Auto: Automatically adjusts the picture for the best quality when watching a film.
Film mode is supported in TV, Video, Component(480i / 1080i) and HDMI(1080i).
N
, then press the ENTER E button.
, then press the ENTER E button. Press the ▲ or ▼ button to move the picture up
English - 14
T V Picture
Mode
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R) G 50
Advanced Settings
Picture Options
Reset
Move
, then press the ENTER E button.
: Standard
8
95
45
50
50
R 50
: OK
Enter Return
Continued...