Adjusting Picture Options - Samsung UE32J5100 E-Manual

Adjusting picture options

MENU
(MENU/123)
You can adjust the picture options to optimise your viewing experience. Select a picture mode and
then adjust the picture options.
Colour Tone
●
Try Now
Adjusts the colour tone. The colour tone you select is stored in the TV's memory. When you
change the current picture mode, the stored colour tone is applied to the new picture mode
automatically.
"
Cool Standard
and
"
Colour Tone
Digital Clean View
●
Reduces static and ghosting caused by a weak signal. When you select
displays the signal strength on the bottom of the screen. Green indicates the best possible
signal.
"
This function is available for analogue channels only.
MPEG Noise Filter
●
Reduces MPEG noise and improves video quality.
HDMI Black Level
●
Compensates for effects caused by a low black level, such as low contrasts and dull colours.
"
This function is only available when the input signal, connected to the TV via an HDMI connector, is set
to RGB444.
Film Mode
●
Try Now
Optimises the picture quality for movies.
"
This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI
(1080i).
LED Clear Motion
●
Removes drag from fast scenes with a lot of movement to provide a clear picture.
"
LED Clear Motion
When
"
LED Clear Motion
If
Analogue Clean View
●
Reduces noise in the form of a diagonal line that occurs due to interferences between signals.
"
This function is only supported for analogue broadcasts.
Picture Picture Options
are only available when
is only available when the TV is connected to a computer via an HDMI-to-DVI cable.
Try Now
Try Now
Try Now
is On, the screen appears darker than when it is Off.
On
is at 60Hz video signal, the screen may flicker.
Try Now
Picture Mode is set to Dynamic.
Auto Visualisation, it