Using Preset Stations - Jensen VM9026 Operating Instructions Manual

Seek Next Station
Touch the icon on the screen to seek the next lower frequency station.
Touch the icon on the screen to seek the next higher frequency station.

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored
stations (
P1, P2, P3, P4, P5, and P6
Selecting FM/AM Band
Touch the BAND icon on the screen to change between the following bands: FM1,
FM2, FM3, AM1, and AM2.
Preview Scan (SCAN)
To scan the AM or FM band for a preview of available stations in your particular area,
touch the SCAN icon on the screen. The scan function will play the first 8 seconds
of each station. When a desired station is reached, touch SCAN icon again to stop
preview scanning. Play of the selected station will continue.
Seek Next Best Signal
To seek the next higher station with the best signal, touch the
To seek the next lower station with the best signal, touch the
Local/Distant Radio Station Seeking
When the Local function is ON, only radio stations with a strong local radio signal
are played. To activate the Local function in the AM/FM tuner mode, touch
LO/DX icon on the screen to turn the local function ON or OFF. When the Local
function is active, "Loc" will appear on the screen. When the Distant function is
active, "Dx" will appear on the screen.
Auto-Store (AS)
This feature has two functions, scan preset stations or store stations.
• Press and hold the AS icon for three seconds to automatically select and store
six strong stations in the current band. The new stations replace stations
already stored in that band. If you have already set the preset memories
to your favorite stations, activating the Auto-Store feature will erase those
14
) for the current band appear on the screen.
VM9026
icon.
icon.