Changing The Interior Lights; Changing The Water Filter (Optional - Samsung Refrigerator User Manual

operating the SAMSUNG
side-by-side refrigerator

Changing thE intErior Lights

Pull the power plug out of the socket before changing the interior light of the refrigerator.
- Otherwise, there is a risk of electric shock.
WARNING
If you experience difficulty when changing the light, contact your service center.
Changing the LED Type Lighting
Do not disassemble or replace the LED type Lighting.
To change the LED Type Lighting contact Samsung service center or your authorized
CAUTION
Samsung dealer.

Changing thE watEr fiLtEr (oPtionaL)

To reduce risk of water damage to your property DO NOT use generic brands of water
filers in your SAMSUNG Refrigerator.
WARNING
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any damage, including, but not limited to
property damage caused by water leakage from use of a generic water filter.
SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.
The "Filter Indicator" light lets you know when it is time to change your water filter cartridge.
To give you preparation time to get a new filter, the red light will come on just before the capacity
of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest
water from your fridge.
1. Remove the water filter from the box and put a month indicator sticker on the filter as
shown.
Place a sticker on the filter that dates six months in the future. For example, if you are
replacing the water filter in March, put the "SEP" (September) sticker on the filter to
remind you to replace in September. Normal filter life is about every 6 months.
2. Remove the new filter's protective cap and remove the old filter.
3. Position and insert the new filter into the filter housing.
Slowly turn the water filter clockwise to align with the printing mark on the cover, locking
the filter in position. Make sure to align the water filter label mark with the center of cover
filter printing as illustrated. Remember, do not over-tighten.
1
2
Sticker
(month indicator)
Cover filter
3
Turn until the
label aligned.
operating _29