Control Panel - Samsung DMT610 Series User Manual

setting up your dishwasher

conTrol panEl

dmT610 Series
dISplAy
1
ChIld lOCK/
2
UNlOCK
SANITIZe
3
delAy START
4
8_ setting up your dishwasher
DMT610_DD68-00085A_EN.indd 8
1 2 3
Displays wash information (Delay start hours, Low rinse, Child Lock/Unlock,
Sanitize).
When Low Rinse remains illuminated, there is no rinse agent in the
dispenser. Refill the rinse aid dispenser.
This option allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To activate and deactivate Child lock/unlock, hold the Child lock/
unlock button down for 3 seconds.
- When Power is On : Hold down the Child lock/unlock button for three
(3) seconds.
- When Power is Off : Push the Power button first, and then hold down
the Child lock/unlock button for three (3) seconds.
The temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then
remains illuminated until the Sanitze option ends. When you open the door
or press Power button, the "Sanitize" lamp turns off.
You cannot select the delicate cycle if you select the Sanitize option.
The Sanitize feature is in accordance with NSF/ANSI standard 184
for Residential Dishwashers. Certified residential dishwashers are not
intended for licensed food establishments. Your dishwasher is NSF
Certified.
The cycle that is NSF certified is the Heavy Cycle with the sanitize option
selected.
Delay a cycle for up to 9 hours in three-hour increments. The hour displayed
indicates the time at which the wash will be started.
4
2010-11-22 2:05:59