Control Panel - Samsung DMT350 Series User Manual

setting up your dishwasher

conTrol panEl

dmT350 Series
dISplAy
1
ChIld lOCK/
2
UNlOCK
delAy START
3
SANITIZe
4
8_ setting up your dishwasher
DMT350_DD68-00080A.indb 8
1 2
Displays wash information (Delay start hours, Low rinse, Blinking LED during
the wash), and error messages.
When Low Rinse remains illuminated, there is no rinse agent in the
dispenser. Refill the rinse aid dispenser.
If an error occurs during an operation, an error message is displayed with a
warning sound. Refer to the Information codes page. (see page 25)
This option allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To activate and deactivate Child lock/unlock, hold the Child lock/
unlock button down for 3 seconds.
- When Power is On : Hold down the Child lock/unlock button for three
(3) seconds.
- When Power is Off : Push the Power button first, and then hold down
the Child lock/unlock button for three (3) seconds.
Delay a cycle for up to 24 hours in one-hour increments. The hour displayed
indicates the time at which the wash will be started.
The temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then
remains illuminated until the Sanitze option ends. When you open the door
or press Power button, the "Sanitize" lamp turns off.
You cannot select the delicate cycle if you select the Sanitize option.
3 4 5
2010-08-30 3:34:31