Adjusting The Height Of The Upper Rack; Removing The Upper Rack - Samsung DMT350 Series User Manual

adjuSTIng ThE hEIghT of ThE uppEr rack

You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can
accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can
accommodate plates up to 14 in. (36cm) in diameter and the upper rack can accommodated plates up to
12 in. (30cm) in diameter.
dmT350 Series
To adjust the height of the upper rack, follow these steps:
1. Remove the upper rack following the directions in Removing the
Upper Rack below.
2. If you want to lower the upper rack, re-install the rack as shown in
Figure A to the right.
3. If you want to raise the upper rack, re-install the rack as shown in
Figure B to the right.
We recommend adjusting the height of the upper rack before
loading dishes into the rack. If you adjust the the rack after loading
CAUTION
the dishes, you may damage the dishes.

rEmovIng ThE uppEr rack

Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the
front. See the illustrations below.
While the upper rack is removable, it must be installed for the dishwasher to operate properly.
If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will
CAUTION
perform poorly.
Step 1.
DMT350_DD68-00080A.indb 15
Step 2.
using your dishwasher _15
Step 3.
2010-08-30 3:34:33