Listening To A Cassette; Recording A Compact Disc; Recording A Radio Program; Selecting The Cassette Playback Mode - Samsung MM-ZJ5 Instruction Manual

Listening to a Cassette

GB
1
Switch the system on by pressing Standby/On ( ) .
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open the cassette deck by pushing on the corner of the cover marked PUSH
EJECT until you hear a click and then release it.
4 Insert the pre-recorded cassette with the open edge of the tape facing
downwards.
5
Close the deck by pushing on it until it clicks into place.
6
Press the TAPE( ) button.
Side A TAPE ( ) once
Side B TAPE ( ) twice
Result: The cassette starts playing.
7
Press TAPE SPEED to adjust the speed of the tape playing.And each
time the button is pressed,the mode changes as follows.
-10%SPEED +10%SPEED NORMAL
8
When the cassette is stopped, select one of the following functions as
required.
To... Press...
Rewind the cassette................... /
Fast-forward the cassette........... /
The cassette player stops automatically when the beginning or end of
the cassette is reached.
9
To stop the playback or search, press Stop ( ) button.
1
2,6
9
8 8
3,5

Recording a Compact Disc

Direct recording
The direct recording mode enables you to start recording with
any track on the compact disc.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing Standby/On ( ) .
2
Insert a blank cassette in Deck.
3
Load a compact disc.
4
Press the CD(
) button.
Use the CD selection ( , ) buttons to select the desired song.
5
Press the REC/PAUSE button.
Result: Recording will begin.
6
To stop recording, press Stop ( )button.
16
1
5
4
4
4
6

Recording a Radio Program

You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on
the recording.
1
Switch the system on by pressing Standby/On (
2
Insert a blank cassette in Deck.
3
Select the TUNER function by pressing TUNER/BAND.
4
Select the radio station that you wish to record by pressing
7
or button on the front panel or or
trol.
5
Press REC/PAUSE.
Result: REC is displayed and recording starts.
6
To stop recording, press STOP ( )button.
1
5
3
4
4
6
Selecting the Cassette
Playback Mode
Your micro component system has three cassette playback
modes which enable you to listen to both sides of a cassette
automatically.
Press REV.Mode until the appropriate symbol is displayed.
When the display indicates... The micro component system plays
SLEEP
REV.MODE
) .
REPEAT
on the remote con-

Tape Counter

When playing a cassette, a counter is displayed to enable you to
take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to
listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note
back...
of the counter values at the beginning of each track, reset the
counter by pressing COUNTER RESET.
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
MO/ST
EQ/S.BASS TAPE SPEED
SHUFFLE COUNTER RESET
CD/MP3-CD
TUNING /
VOLUME ALBUM
/
TUNING
MODE
+10
GB
AUX
PROGRAM/SET REP. A B
MO/ST
SLEEP EQ/S.BASS TAPE SPEED
REV.MODE SHUFFLE COUNTER RESET
CD/MP3-CD
TUNING /
VOLUME
ALBUM
/
TUNING
REPEAT
MODE
+10
TA P E
17