3.
Install the:
a) heatsink
b) video-card heat sink
c) video-card fan
d) palm rest
e) primary and secondary hard drive
f) optical drive
g) keyboard
h) keyboard trim
i)
base cover
j)
battery
4.
Follow the procedures in
Removing the Input/Output (I/O) Board
1.
Follow the procedures in
2.
Remove the:
a) SD card
b) battery
c) base cover
d) keyboard trim
e) keyboard
f) optical drive
g) primary and secondary hard drive
h) palmrest
3.
Disconnect the ExpressCard module connector from the I/O board.
48
After Working Inside Your Computer.
Before Working Inside Your Computer .