Impex MWM-981 Owner's Manual page 11

STEP 3 (See Diagram 3)
A.) Attach the Front Press Base (#8) to the Upper Frame (#1). Secure it with one 8 ½" Front Press
Axle (#19), two Ø 1" x Ø 5/8" Washers (#75), and two M10 Aircraft Nuts (#70). Do not over
tighten the Nuts.
B.) Insert the axle on the Left Butterfly (#9) through the open hole on Front Press Base from bottom.
Secure it with one Ø 1" x Ø 5/8" Washers (#75) and one M10 Aircraft Nuts (#70). Do not over
tighten the Nut. Push one large Foam Roll (#27) onto the Left Butterfly.
C.) Repeat Procedure B to install the Right Butterfly (#10).
D.) Insert the two Butterfly Lock Pins (#45) through the holes on Front Press Base into holes on
Butterfly to lock the Butterflies for Front Press exercise.
E.) Pull out the Butterfly Lock Pins and insert into the other open holes on the Front Press Base for
Butterfly exercise.
10