Maintenance And Care - Echo EDR-210 Operator's Manual

Engine drill
Hide thumbs Also See for EDR-210:
Table of Contents

Advertisement

AREA
MAINTENANCE
Air Filter
Clean/Replace
Fuel Filter
Inspect/Clean/
Replace
Spark Plug
Inspect/Clean/
Adjust/Replace
Carburetor
Adjust
Cooling System
Inspect/Clean
Silencer
Inspect/Tighten/
Clean
Starter Rope
Inspect/Replace
Drills
Inspect/Clean/
Lubricate
Fuel Leaks
Inspect
Screws, Bolts and Inspect,
Nuts
Tighten/Replace
Fuel Line
Inspect
EMISSION CONTROL
(EXHAUST and EVAPORATIVE)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM
(engine modifi cation) and, if the second to last
character of the Engine Family on the Emission
Control Information label (sample below) is "C", "K",
or "T",the emission control system is EM and TWC
(3-way catalyst). The fuel tank/fuel line emission
control system is EVAP (evaporative emissions).
Evaporative emissions for California models may
only be applicable to fuel tanks.
An Emission Control Label is located on the
engine. (This is an example only, information on
label varies by engine family).

MAINTENANCE AND CARE

PAGE
13
13
13
14
15
15
-
-
13
-
-
EMISSION DATA
BEFORE
MONTHLY
USE
IMPORTANT
Time intervals are maximum. Actual use and
your experience will determine the frequency
of required maintenance.
Record dates of monthly and yearly
inspections.
PRODUCT EMISSION DURABILITY
(EMISSION COMPLIANCE PERIOD)
The 300 hours emission compliance period is
the time span selected by the manufacturer
certifying the engine emissions output meets
applicable emissions regulations, provided that
approved maintenance procedures are followed
as listed in the Maintenance Section of this
manual.
11
YEARLY
DATE
MAINTENANCE
PERFORMED

Advertisement

Table of Contents
loading

Table of Contents