Motion Control Levers; Controls - Husqvarna MZ28T Operator's Manual

Motion Control Levers

The machine's speed and direction are continuously
variable using the two steering controls. The
steering controls can be moved forward or
backward about a neutral position. Furthermore,
there is a neutral position, which is locked if the
steering controls are moved outward.
When both controls are in the neutral position (N),
the machine stands still.
By moving both controls an equal amount forward
or backward, the machine moves in a straight line
forward or backward respectively.
For example, to turn right while moving forward,
move the right control towards the neutral position.
The rotation of the right wheel is reduced and the
machine turns to the right.
Zero turn can be achieved by moving one control
backward (behind the neutral position) and carefully
moving the other steering control forward from its
neutral position. The rotation direction when zero
turning is determined by which steering control is
moved backward behind the neutral position. If the
left steering control is pulled backward, the machine
turns to the left. Use extra care when using this
maneuver.
18
-Husqvarna

CONTROLS

Steering controls
1. Forward
2. Neutral
3. Neutral slot, Neutral lock
4. Reverse
Motion control lever pattern (right side)
WARNING!
The machine can turn very rapidly if
one steering control is moved much
further forward than the other.
8058-042
8065-053