Fitting the loop handle
•
Clip the loop handle onto the shaft. Note that the loop
handle must be fitted between the arrows on the shaft.
•
Fit the bolt, securing plate and wing nut as shown in
the diagram. Tighten the wing nut.
Fitting the trimmer guard and
trimmer head
•
Fit the guard as shown in the diagram. Tighten
securely.
10 – English
ASSEMBLY
•
Fit the dust cup on the shaft. The nut must be
completely covered by the dust cup.
•
Hold the dust cup with a spanner to prevent the shaft
from rotating.
•
Screw the trimmer head onto the shaft.