Using The G-Code Feature - Samsung DVD-SH873 User Manual

USING THE G-CODE FEATURE

Before presetting your HDD & DVD Recorder.
•
Switch on both the television and your HDD & DVD Recorder.
•
Check that the date and time are correct.
Up to twelve programmes can be preset.
1. With the unit in Stop mode, press the TIMER button.
Press the ▲▼ buttons to select G-Code, then press the OK or
2.
► button.
•
A message is displayed to allow you to enter the G-Code
code.
3. Press the number buttons to enter the code of the programme
that you want to record in your television magazine.
•
If you want to correct the G-Code code that you are entering:
- Press the ◄ button until the digit to be corrected is cleared.
- Enter the correct digit.
4. Press the OK button.
•
The information concerning the programme is displayed.
•
When using the G-Code function for the fi rst time with stored
stations, the programme number fl ashes. This one time, you
must enter the PR number manually by pressing the ▲▼
buttons.
5. Press the RED(A) button if you do not want to use the default title name.
The rename screen is displayed.
Follow steps 4 and 5 of "Renaming (Labeling) a Title" on pages 84~85.
6. If the programme and times are correct, press the OK button.
7. Turn the power off by pressing the STANDBY/ON button to activate the timer recording setting.
•
Refer to pages 78~79 if you want to
- Check whether the timer Recording has set correctly or not.
- Cancel a preset recording.
M

The numbers next to each TV programme listing in the magazines or newspapers are G-Code code numbers, which
allow you to programme your HDD & DVD Recorder. instantly with the remote control. Enter the G-Code code for the
programme you wish to record.

G-Code is a trademark of Gemstar Development Corporation. The G-Code system is manufactured under licence
from Gemstar Development Corporation.
SXCVKL
HDD & DVD RECORDER
HDD
Library
Guide
Enter G-Code Code number. [0-9]
Channel
Timer Record
(Press [OK] button : Make Code)
Disc Manager
Setup
NUMBER sSELECT rRETURN
HDD
Current Time 10:54
No. To Source Date Start End
No.01 No Title
To Source Date Start End
– –
HDD JAN 01 10:54 12:54
Recordable Time HDD 108:14 SP Title sSave
Recordable Time HDD 65:19 XP
Recorded List
< MOVE sSELECT rRETURN
English _81
G-Code
eEXIT
Scheduled List
Mode
Mode
SP
eEXIT