Ryobi 725rE Operator's Manual page 6

SYMBOL
e
5-7x
A B c
I-I ltl
MEANING
• WEAR EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can cause severe eye injury and hearing boss.
Wear eye protection meeting ANSI Z87.1 standards and ear protection when
operating this unit,
• KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders, especlally children and pets, at least 50 feet (15 m)
from the operating area.
• PRIMER BULB
Push primer bulb, fully and slowly, 5 to 7 times.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator's manual for the proper type of oil.
• THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY
WARNING: Do not operate without the cutting attachment shield in place.
Keep away from the rotating cutting attachment.
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF OR STOP
• HOT SURFACE WARNING
Do not touch a hot muffler, gear housing or cylinder. You may get burned. These parts get
extremely hot from operation. When turned off they remain hot for a short time.
,, SHARP BLADE
WARNING: Sharp blade on cutting attachment shield, To prevent serious injury, do not
touch line cutting blade.
• CHOKE CONTROL
A • FULL choke position.
B • PARTIAL choke position.
C • RUN position.
• DO NOT USE BLADES
WARNING: To prevent serious personal injury, do not attach or operate the
unit with any type of brushcutting blade or brushcutting attachment,
WARNING: The operation of any power tool can cause foreign objects to be thrown into your
eyes. This can lead to severe eye damage. Before commencing power tool operation, always
wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and a full
face shield when needed.
6